Threaded coupling connection for non-upset tubing pipes, GOST 633-80

 

Application

The connection is intended for use in oil and gas wells.

 

Design description

The peculiar design feature of connections with the thread of round (triangular) profile is that the thread fits along the lateral sides of the triangular profile. The required tightness of the connection is ensured by thread-lubricant sealing of clearances during the mechanical make-up. The thread profile has the angle of 60°, taper of 1:16.

Make-up control

  • In case of correct mechanical make-up, the coupling face moves up to the surface of pipe thread run-out end.

Main features of non-upset tubing pipe connections as per GOST 633-80

Pipe nominal diameter, mm Pipe Coupling
Outer diameter D, mm Wall thickness S, mm Inner diameter d, mm Weight* of 1 m pipe, kg Outer diameter Dc, mm Coupling length Lm, mm Weight*, kg
1 2 3 4 5 6 7 8
33 33,4 3,5 26,4 2,6 42,2 84 0,4
42 42,2 3,5 35,2 3,3 52,2 90 0,6
48 48,3 4,0 40,3 4,4 55,9 96 0,5
60 60,3 5,0 50,3 6,8 73,0 110 1,3
73 73,0 5,5 62,0 9,2 88,9 132 2,4
7,0 59,0 11,4
89 88,9 6,5 75,9 13,2 108,0 146 3,6
102 101,6 6,5 83,6 15,2 120,6 150 4,5
114 114,3 7,0 100,3 18,5 132,1 156 5,1
* — estimated value